HP 24SII - Manual (Page 163)

LaserShare is an intelligent printer controller that allows up to four or
eight computers to send data to a single HP LaserJet Series II, IID, III,
IIID, Brother HL8e* and HL8v*, or Wang LDP8 laser printer.
LaserShare connects directly into the optional I/O slot of the laser
printer. Power is taken directly from the laser printer so there is no
need for a power cord. LaserShare can accept data from all ports
simultaneous and is printed on a first-in first-out basis. All LaserShare
models come standard with a buffer that can range from 256K to 4.0
MB. LaserShare 4C comes with four EIA-232C serial ports,
LaserShare 8C comes with eight serial ports, LaserShare 4E comes
with two parallel and two serial ports, and LaserShare 4A comes with
four parallel ports.
* The LaserShare device for the Brother HL8e and HL8v is referred
to as LaserShare 4CB. This device is available with four (4) serial
computer ports and a fixed buffer size of 256KB.
Tran-x high speed parallel/serial converter products allow you to
extend parallel cables to 1000+ feet and allow your network server,
graphics workstation, or PC to send/receive data at speeds up to
46,000 characters per second. You can use the Tran-x Series with
BayTech Model 24SII or LaserShare for the fastest long distance
peripheral sharing solution available anywhere. Modular cabling
provides simplicity in connections between remote devices. Tran-x
LPT-460 card plugs directly into your PC expansion slot. Tran-x PS-
02 connects to your PC's parallel port. Tran-x SP-01 connects to the
Centronics connector of a parallel printer. Tran-x PS-02 connects to
the DB-25 parallel port of the BayTech 700 Series Print Master or 800
Series Print Master II peripheral sharing units.