HP 2240 - Manual (Page 240)

D-29
Displaying the Status of the System I/O
The IO command lets you identify all built–in I/O devices and option-
al I/O devices installed in the option slots. It is available in the In-
formation Menu.
To use the IO command from the Information Menu of the boot con-
sole interface, type:
Information Menu: Enter command > IO
Information about the built–in and optional I/O devices is displayed.
I/O MODULE INFORMATION
IODC IODC
Path Decimal Type Location HVER SVER Vers Dep
–––– –––––––– –––– –––––––– –––– –––– –––– –––
8/0 8/0 Bus Bridge built–in 6800 0a00 0x00 0x00
FWSCSI 8/12 A DMA I/O built–in 03b0 8980 0x96 0x00
8/16 8/16 Bus Adapter built–in 03b0 8100 0x00 0x00
8/16/0 8/16/0 Parallel built–in 03b0 7400 0x00 0x00
8/16/1 8/16/1 Audio built–in 03b4 7b00 0x00 0x00
SERIAL_1 8/16/4 RS232 built–in 03b0 8c00 0x01 0x00
SESCSI 8/16/5 SE SCSI built–in 03b0 8200 0x96 0x00
LAN 8/16/6 LAN built–in 03b0 8a00 0x02 0x00
PS2 8/16/7 Keyboard built–in 03b0 8400 0x00 0x00
8/16/8 8/16/8 Mouse built–in 03b0 8400 0x00 0x00