HP 2240 - Manual (Page 238)

D-27
Memory Information Sample 2
The following sample shows the memory information when memory
modules are not properly installed and configured. In this sample the
memory module in memory slot 1A is missing.
MEMORY INFORMATION
WARNING: Memory has been reconfigured due to a
physical change or because the
Page Deallocation Table (PDT) was cleared.
This is for information only. No action is re-
quired.
MEMORY STATUS TABLE
Slot Size(a+b) Status
–––– ––––––––– ––––––
0a/b 64MB Configured
1a/b ??MB SIMM not seated properly.
2a/b 128MB Configured
–––––––––
TOTAL 192MB
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC SMC Status Bank Bank Status Size Slot
––– ––––– ––– –––––––––– –––– –––––––––– –––– ––––
0x00000000 0 0 Configured 1 Configured 64MB 2a/b
0 Configured 3 Configured 64MB 0a/b
1 Configured 1 Configured 64MB 2a/b
Group 0 interleaved 2 ways over 3 banks
BAD MEMORY TABLE