HP 2240 - Manual (Page 235)

D-24
Displaying the Current Memory Configuration
The following sample screen output using the memory command
shows: first, a memory configuration table with properly–installed
and configured memory (Sample Output 1); and second, output when
a DIMM has been improperly installed (Sample Output 2).
To display the current memory configuration for your system, from
the Information Menu of the boot console interface, follow the direc-
tions in ”Accessing the Boot Console Interface” earlier in this appen-
dix. Once you are in the Boot Console Interface Main Menu, type:
Main Menu: Enter command > information
This places you in the Information Menu. From here type:
Information Menu: Enter command > memory
The screen displays status and configuration information for the
memory DIMMs installed in your workstation. The first listing below
shows the memory information for a system with correctly installed
and configured memory modules. The second listing shows the in-
formation for a system that has memory modules incorrectly installed
or configured.