High End Systems DL.3 - Manual (Page 34)

WholeHog 3 Console Laptop Computer
Ethernet
Hub
DMX Universe 1 DMX Universe 2
DP2000
ArtNet
Configuration Option 2
DMX 512 Data Cabling
Ethernet Cabling
CHAPTER 2
Setup and Configuration
12 DL.3 Digital Light User Manual
Powering On the Fixture
WARNING:
This equipment is designed for connection to a branch circuit
having a maximum overload protection of 20 A.
CAUTION:
Do not power on the fixture until verifying that the line cord
cap is suitable for the power source in your location. For more
information, see Attaching a Power Cord Cap on page 7.
Disengage Pan and Tilt locks before operating the fixture. For
more information, see Pan and Tilt Locking on page 7.
To power on the DL.3 fixture, simply connect it to an appropriately-rated power source.
CAUTION:
Always isolate DL.3 media servers from generators with a UPS
or good quality power conditioner to prevent damage occurring
to the integrated media server and projector housed in the
DL.3 from generator drop-outs, and sharp voltage and
frequency fluctuations.