High End Systems DL.3 - Manual (Page 206)

CHAPTER 15
Live Video Input and Control
184 DL.3 Digital Light User Manual
Live Video Connection Options
The DL.3 fixture has video connectors for RGBHV, VGA and S-Video on its rear panel, as shown
in the following figure.
Configuring the Video Input Source
S-Video
DL.3 fixtures support multiple SVideo formats including:
You will need to configure the DL.3 fixture to identify which video input source you have chosen.
The active input can be configured the following ways:
• Manually using the DL.3 menu system (see information about the Projector Input field on
the “Set_Projector Screen” on page 3-31.)
• Remotely through the CMA (see “DL.3 and DL.2 Media Server Configuration Options” on
page 16-208).
• Via the DMX console commands (see “Projector Control” on page 14-181).
NOTE: The integrated camera provides an NTSC_M video signal.
CAUTION:
To avoid damaging the fixture and voiding the warranty, do not
physically connect to the RGBHV and VGA inputs at the same time.
NTSC_M PAL_B PAL_H SECAM_B SECAM_K
NTSC_MJ PAL_D PAL_I SECAM_D SECAM_K1
PAL_G PAL_M SECAM_G SECAM_L
PAL_N SECAM_H SECAM_L1
USB 1
100-120 V;
50-60Hz; 7A
200-240 V;
50-60Hz; 3.5 A
USB 2
S-Video Camera
S-Video In to
the graphics engine
VGA input to
RGBHV input option
to the projector
Output to another
DL.3 fixture or device
including hard drives running the CMA
the projector
SDI Input SDI Output