High End Systems DL.3 - Manual (Page 250)

CHAPTER 17
Maintenance and Troubleshooting
228 DL.3 Digital Light User Manual
System State LEDs
Five labeled LEDs on the display panel indicate the following system activity:
Filter Service Warning FILTER SERVICE WARN
Filter needs Servicing. Replace
Filter SOON.
See “Cleaning and
Replacing Filters” on
page 17-216
Projector Lamp Life
Error
LAMP LIFE ERROR
The Lamp has exceeded it’s
rated life and must be replaced
now.
See “Replacing the
Lamp” on page 17-
219.
Projector Lamp Life
Warning
LAMP LIFE WARN
The Lamp is nearing the end of
it's rated life. Replace soon
Projector
Communication Error
PROJ COMM ERROR
The system is unable to
communicate to the Projector.
Check the Comm
cable connections at
serial port on the
back of projector and
at the fixture head
card.
Make sure lamp is
struck
Projector Temperature
Fail Error
PROJ TEMP ERROR
Projector temperature has
exceeded operational range and
has shutdown
Cool fixture and then
restrike the lamp
Projector Temperature
Warning
PROJ TEMP WARN
Projector is over recommended
operating temperature
USB port
Communication Error
USB INIT ERROR
The PC failed to initialize USB
communication with the box
card.
Contact High End
Systems Customer
Support
USB port Security Error USB SECURE ERROR
USB failed to pass the hardware
security test.
Name Color State Description
Projector White On Projector lamp is on
Off Projector lamp is off
Blinking Projector lamp is either cooling down or in a indeterminate state
Status Green On (45 sec On/1.4 sec.Off) Running normal motion-control code
Blinking Board communication activity; for example, during a software upload
Blinking
Slowly 320 processor card in the base housing is receiving code.
Drive Amber Blinking Hard drive activity
Server Blue Steady Internal computer is receiving power
Power Red Steady Fixture’s Motion Control system is receiving power
Issue Large Format Message Message Detail Notes