Hand Held Products 2020 - Manual (Page 94)

6 - 4 2020/3820 User’s Guide
When Check Character is set to Validate, but Don’t Transmit , the unit will only
read Codabar barcodes printed with a check character, but will not transmit the
check character with the scanned data.
Codabar Concatenation
Codabar supports symbol concatenation. When you enable concatenation, the
image scanner looks for a Codabar symbol having a “D” start character, adjacent
to a symbol having a “D” stop character. In this case the two messages are
concatenated into one with the “D” characters omitted.
Default = On.
Select Require to prevent the image scanner from decoding a single “D” Codabar
symbol without its companion. This selection has no effect on Codabar symbols
without Stop/Start D characters.
* No Check Character
Validate Modulo 16 and Transmit
Validate Modulo 16, but
Don’t Transmit
A12D D34A
Codabar
Character Stop Start Stop Start
On
* Off
Require