Hand Held Products 2020 - Manual (Page 60)

2 - 14 2020/3820 User’s Guide
Wand Emulation
Wand Emulation Connection
The Wand Emulation Connection barcodes should be used if you want to change
the terminal ID
only , without changing any other image scanner settings. We
recommend using Wand Emulation Plug & Play barcodes to program your image
scanner to emulate a wand reader. The Wand Emulation Plug & Play barcodes
change other parameters, in addition to changing the terminal ID. Please refer
to
Wand Emulation Plug & Play on page 1-22 for further information.
In Wand Emulation mode, the image scanner decodes the barcode then sends
data in the same format as a wand scanner. The Code 39 Format converts all
symbologies to Code 39.
The Same Code Format transmits UPC, EAN, Code 128 and Interleaved 2 of 5
without any changes, but converts all other symbologies to Code 39. 2D
symbologies are converted to Code 128.
The Code 39 Format barcode below sets the terminal ID to 61, and the Same
Code Format barcode sets the terminal ID to 64.
Code 39 Format
Same Code Format