Code 93, Code 93 message length, Code 93 -11 – Hand Held Products 2020 User Manual
Page 101: Code 93 code page, Default all code 93 settings
6 - 11
Code 93
< Default All Code 93 Settings >
Code 93
Code 93 Message Length
Scan the barcodes below to change the message length. Refer to
on page 6-2 for additional information. Minimum and Maximum
lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created from the chart,
Code
Page Mapping of Printed Bar Codes
on page A-4, and scan the value and the
SAVE barcode from the
inside the back cover of this manual.
The data characters should then appear properly.
* On
Off
Minimum Message Length
Maximum Message Length
Code 93 Code Page