Hand Held Products 3800 - Manual

500002583-PI Rev B 1
IMAGETEAM™ 3800 USB Programming Instructions
Connecting the Scanner - USB
1. Turn off power to the computer.
2. Connect the cable's modular connector to the scanner.
3. Connect the USB connector to the PC.
4. Once the scanner is fully connected, power up the computer.
PC Interface
Read the bar code that describes the PC or interface you are using.
Carriage Return
If you want a suffix (Carriage Return, Carriage Return and Line Feed, Tab) after the bar code, scan the appropriate bar code
below. If you want to remove the suffixes, scan the Remove Suffix bar code.
Factory Defaults
The following bar code resets all factory defaults.
1 2
USB Keyboard (PC) USB HID Bar Code Scanner
Add CR Suffix
Tab Suffix
Add CR, LF Suffix
Remove Suffix
Factory Default