Hand Held Products 2020 - Manual (Page 31)

2020/3820 User’s Guide 1 - 13
Using the Image Scanner with Bluetooth Devices
The 3820 image scanner may be used either with the 2020 base or with other
Bluetooth devices. Scanning the Non-Base Bluetooth Connection barcode
below allows the image scanner to be used with other Bluetooth devices (e.g.,
PDA, PC - Bluetooth USB Adapter). After you scan the barcode below, follow
the instructions supplied with your Bluetooth device to locate the image scanner
and connect to it. If you go out of range with your image scanner, the image
scanner automatically reconnects to the Bluetooth device. If you want to relink
to the 2020 base, refer to
"Override Locked Image Scanner" on page 1-7 or
"Resetting the Standard Product Default Settings: All Application Work
Groups"
on page 1-12 .
Note: The multiple work groups option is not available when you are using the
imager with Bluetooth devices other than the 2020 base.
Changing Bluetooth PIN Code
Some devices require a PIN code as part of the Bluetooth security features. Your
image scanner’s default PIN is 1234, which you may need to enter the first time
you connect to your PDA or PC. The PIN code must be between 1 and 16
characters. To change the PIN, scan the barcode below and then scan the
appropriate numeric barcodes from the
Programming Chart inside the back
cover of this manual. Scan Save to save your selection.
Note: Refer to Minimizing Bluetooth/ISM Band Network Activity beginning on
page B-1 for additional Bluetooth/ISM information.
Non-Base BT Connection
Bluetooth PIN