HP 6300 - Manual (Page 26)

Supported connection types
Description Recommended
number of
connected
computers for best
performance Supported software
features Setup instructions
USB connection One computer
connected with a
USB cable to the rear
USB 2.0 HS port on
the HP All-in-One. All features are
supported, except
Webscan
* .
Follow the Setup
Guide for detailed
instructions.
Ethernet (wired)
connection Up to five computers
connected to an
HP All-in-One using a
hub or router. All features are
supported, including
Webscan. Follow the
instructions in the
Setup Guide, and
then see
Connect to
a network in this User
Guide for further
instructions.
HP bt450, Printer and
PC Adapter with
Bluetooth
® Wireless
Technology
One Bluetooth device
or computer. Printing from a
Bluetooth device
such as a PDA,
camera phone, or
Bluetooth-enabled
computer. Follow the
instructions in
Connect using the
HP bt450, Printer and
PC Adapter with
Bluetooth® Wireless
Technology
.
Printer sharing Up to five computers.
The host computer
must be turned on at
all times, or the other
computers will not be
able to print to the
HP All-in-One. All features resident
on the host computer
are supported. Only
print is supported
from the other
computers. Follow the
instructions in
Use
printer sharing .
* For information on Webscan, see the onscreen Help.
Connect using a USB cable
Refer to the Setup Guide that came with the HP All-in-One for detailed instructions on
using a USB cable to connect a computer to the rear USB port.
Connect using Ethernet
The HP All-in-One supports both 10 Mbps and 100 Mbps Ethernet network
connections. For information on connecting the HP All-in-One to an Ethernet (wired)
network, first refer to the Setup Guide that came with your device. Then, see
Connect
to a network for further instructions.
User Guide 23
Finish
setup