Adjust the volume, Connection information – HP 6300 User Manual
Page 25
Note
In some countries/regions, the date and time stamp on the fax header is
a legal requirement.
If the HP All-in-One loses power for more than 72 hours, you might need to reset the
date and time.
To set the date and time
1.
Press
Setup
.
2.
Press
6
, and then press
3
.
This selects
Tools
and then selects
Date and Time
.
3.
Enter the month, day, and year by pressing the appropriate numbers on the
keypad. Depending on your country/region setting, you might enter the date in a
different order.
4.
Enter the hours and minutes.
5.
If your time is displayed in the 12-hour format, press
1
for AM, or
2
for PM.
The new date and time settings appear on the display.
Adjust the volume
The HP All-in-One provides three levels for adjusting the ring and speaker volume.
The ring volume is the volume of the phone rings. The speaker volume is the level of
everything else, such as the dial tones, fax tones, and button press beeps. The default
setting is
Soft
.
To adjust the volume from the control panel
1.
Press
Setup
.
2.
Press
4
, and then press
4
again.
This selects
Basic Fax Setup
and then selects
Ring and Beep Volume
.
3.
Press to select one of the options:
Soft
,
Loud
, or
Off
.
4.
Press
OK
.
Connection information
You can use the HP All-in-One as a stand-alone copier, fax machine, and photo
printer, or you can connect the HP All-in-One to a computer or bluetooth device to
enable printing and other software features. The different connection options available
to you are described in the following sections.
●
●
●
●
Connect using the HP bt450, Printer and PC Adapter with Bluetooth® Wireless
Technology
●
Set Bluetooth security for the HP All-in-One
●
Use a Bluetooth® connection to print from your computer
●
Chapter 3
22
HP Officejet 6300 All-in-One series
Finish
setup