HP 6300 - Manual (Page 133)

separator pad after extensive use, or if you copy handwritten originals or originals
that are heavy with ink.
●
If the automatic document feeder does not pick up any pages at all, the
rollers inside the automatic document feeder need to be cleaned.
● If the automatic document feeder picks up multiple pages instead of single
sheets, the separator pad inside the automatic document feeder needs to be
cleaned.
Solution Load one or two sheets of unused plain white full-size paper into the
document feeder tray and press Start Copy Black . As the plain paper passes
through the automatic document feeder, the paper releases and absorbs residue
from the rollers and separator pad.
Tip If the automatic document feeder does not pick up the plain paper,
try cleaning the front roller. Wipe the roller with a soft lint-free cloth
dampened with distilled water.
If the problem persists, or the automatic document feeder does not pick up the
plain paper, you can clean the rollers and separator pad manually.
To clean the rollers or separator pad
1.
Remove all originals from the document feeder tray.
2. Lift the automatic document feeder cover (1).
This provides easy access to the rollers (2) and separator pad (3), as shown
below.
1 Automatic document feeder cover
2 Rollers
3 Separator pad
3. Lightly dampen a clean lint-free cloth with distilled water, then squeeze any
excess liquid from the cloth.
Chapter 11
130 HP Officejet 6300 All-in-One series
Troubleshooting