Installing the automatic document feeder – Epson 10000XL User Manual

Page 54

Text mode
Original mode

Using Optional Equipment

Installing the Automatic Document Feeder

Note: The automatic document feeder (ADF) is heavy, so be sure to have someone help
you with this procedure. Also, because the document feeder is large, leave adequate
space around the scanner for handling it.

1. Make sure your scanner is turned off, then

unplug the power cord from the scanner.

2. Fully open the scanner’s document cover,

then lift it straight out.

3. Insert the installation screws

that came with the ADF into
the holes in the back of the
scanner, then secure them with
the included screwdriver tool.

4. Attach the two smaller feet to

the ADF as shown.

10000XL.book Page 54 Friday, June 4, 2004 1:57 PM