beautypg.com

16 energy consumption display, 17 power limitation, 7 home connect – Thermador Masterpiece Series 36 Inch Induction Smart Cooktop Use and Care Guide User Manual

Page 24: 1 setting up home connect

background image

en-us 

Home Connect™

24

3.

Press KITCHEN TIMER to access the basic settings.

a

In the left display and flash alternately.

a

In the timer display lights up.

4.

Press KITCHEN TIMER repeatedly until the desired

setting lights up in the left display.

5.

Set the desired option in the settings area.

6.

Press KITCHEN TIMER for about 4 seconds.

a

The setting is saved.

Tip: Press ON I OFF to leave the basic settings and turn

off the cooktop.

6.16 Energy consumption display

This function indicates the total amount of energy con-

sumed between turning the cooktop on and turning it off

again.

Once cooktop is turned off, the energy consumption is dis-

played in kWh for 10 seconds, e.g. 1.08 kWh. The accu-

racy of the display depends on various factors such as the

voltage quality of the power supply.

You can activate or deactivate this function in the basic

settings menu.

→ 

Page 23

6.17 Power limitation

You can use the PowerManager function to set the total

power of the cooktop.

The cooktop is set at the factory; the cooktop's maximum

power is shown on the rating label. You can use this func-

tion to adjust the configuration to the requirements of each

electrical installation.

In order to not exceed this set value, the cooktop automat-

ically distributes the available power as needed between

the cooking zones that are switched on.

While this function is activated, the output of each cooking

zone may temporarily fall below the nominal value. In or-

der to not exceed this set value, the cooktop automatically

distributes the available power as needed between the

cooking zones that are switched on . The appliance regu-

lates and selects the highest power level automatically.

For more information, go to

→ 

"Basic settings", Page 23

Home Connect™

7 Home Connect™

Home Connect™

This appliance is network-capable. Connecting your appli-

ance to a mobile device lets you control its functions via

the Home Connect™ app, adjust its basic settings and

monitor its operating status.

The Home Connect™ services are not available in every

country. The availability of the Home Connect™ function

depends on the availability of Home Connect™ services in

your country. You can find information on this at:

www.home-connect.com.

The Home Connect™ app guides you through the entire

registration process. Follow the instructions in the

Home Connect™ app to implement the settings.
Tips

¡

Consult the Home Connect™ documents supplied.

¡

Follow the instructions in the Home Connect™ app as

well.

Notes

¡

Also note the safety information in this instruction man-

ual and ensure that it is also observed when operating

the appliance using the Home Connect™ app.

¡

Cooktops are not designed to be left unattended. Al-

ways monitor the cooking process.

¡

Operating the appliance on the appliance itself always

takes priority. It is not possible to operate the appliance

using the Home Connect™ app during this time.

¡

In networked standby mode, the appliance requires a

maximum of 2 watts.

7.1 Setting up Home Connect™

Requirements

¡

The appliance is connected to the power supply and is

switched on.

¡

You have a mobile device with a current version of the

iOS or Android operating system, e.g. a smartphone.

¡

The mobile device and the appliance are within range of

your home network's Wi-Fi signal.

1.

Download the Home Connect™ app.

2.

Open the Home Connect™ app and scan the following

QR code.