Thermador Masterpiece Series 36 Inch Induction Smart Cooktop Use and Care Guide - Manual (Page 16)

en-us Operation
16
▶
Press STOP WATCH.
a lights up on the timer display.
a The indicator above STOP WATCH lights up.
a The timer starts to count up.
Canceling the Stopwatch
1.
Press STOP WATCH.
a The timer stops running.
2.
Press STOP WATCH again.
a The timer is cleared and turns off.
6.9 PowerBoost®
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily in-
creases the top output of the selected cooking zone.
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Restrictions for using the PowerBoost® function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available, and blink on the dis-
play of the selected cooking zone. The power level is
set automatically.
Activating PowerBoost®
1.
Press to select the cooking zone.
2. Touch POWER BOOST.
a lights up in the cooking zone display.
Deactivating PowerBoost®
The function may be deactivated automatically to avoid
overheating. This serves to protect the internal electronic
components of the cooktop.
1.
Press to select the cooking zone.
2. Press POWER BOOST.
a goes out.
a The cooking zone switches to power level ⁠.
Notes
¡ In certain circumstances, this function may switch off
automatically in order to protect the electronic elements
inside the cooktop.
¡ If you have set a power level before activating the func-
tion, this power level is used automatically after the
function has been deactivated.
6.10 PanBoost®
With this function you can heat cookware faster than with
power level ⁠.
You can also use this function on the flexible cooking zone
if it is used as a joined cooking zone.
Recommendations for using this function:
¡ Always use cookware that has not been pre-heated.
¡ Use cookware with a flat base.
¡ Do not use cookware with a thin base.
¡ Never leave empty cookware, oil, butter or lard to heat
up unattended.
¡ Do not place a lid on the cookware.
¡ Place the cookware on the center of the cooking zone.
¡ Ensure that the diameter of the base of the cookware
matches the size of the cooking zone.
¡ Refer to the information on cooking with induction for in-
formation on the type, size and positioning of the cook-
ware. → Page 9
Restrictions for using the PanBoost® function
¡ This function can only be used on one cooking zone of
the same cooktop segment at a time. The illustration
shows these segments of your cooktop.
¡ If the function is not available, and blink on the dis-
play of the selected cooking zone. The power level is
set automatically.
Activating PanBoost®
WARNING
Oil and fat heat up quickly with the PanBoost® function.
Overheated oil and fat may ignite.
▶
Never leave the cooktop unattended during cooking.
1.
Press to select the cooking zone.
2.
Press POWER BOOST twice.
a ⁠. lights up on the cooking zone display.
Deactivating PanBoost®
The function is turned off automatically after 30 seconds.
You can turn it off manually before that.
1.
Press to select the cooking zone.
2. Press POWER BOOST.
a ⁠. goes out.
a The cooking zone switches to power level ⁠.
6.11 MoveMode®
You can use this function to transfer the settings from one
cooking zone to another.
To transfer the settings, move the cookware from the
cooking zone you are using to another cooking zone.
You can also use this function on the flexible cooking
zone. For additional information on how to position the
cookware, refer to the information on using the flexible
cooking zone.
→ "Liberty® cooking zone", Page 13