EnGenius Technologies EOA7530 User Manual
Page 69
68
To set up the EOA7530 for this configuration, perform the following steps:
Step 1: Enable 5 GHz and 2.4 GHz Operation Modes
‐ Launch the Web Configurator via a Web browser.
‐ In the left pane, under Management, click Operation Mode. The configuration screen appears.
‐ On the top, click Separate Mode.
‐ Under Please choose the Operation Mode. (5GHz), click Access Point Mode.
‐ Under Please choose the Operation Mode. (2.4GHz), click Access Point Mode.
‐ Click Apply.
Step 2: Enter the ESSID (Wireless Name) for 5 GHz operation
‐ In the left pane, under 5GHz Wireless, click Basic Settings.
‐ When the configuration screen appears, click in the ESSID field and enter the wireless name
(ESSID) that you want the Access Point to broadcast to the wireless 5 GHz client devices.
Note: For the devices in the 5 GHz WLAN to communicate with each other, they must all be
configured with the same ESSID.
3.
Click Apply.
Step 3: Enter the ESSID (Wireless Name) for 2.4 GHz operation
‐ In the left pane, under 2.4GHz Wireless, click Basic Settings.
‐ When the configuration screen appears, click in the ESSID field and enter the wireless name
(ESSID) that you want the Access Point to broadcast to the wireless 2.4 GHz client devices.
Note: For the devices in the 2.4 GHz WLAN to communicate with each other, they must all be
configured with the same ESSID.
‐ Click Apply.