EnGenius Technologies EOA7530 - Manual (Page 23)

Chapter 5 Wireless Configuration
This chapter describes the EOA7530’s wireless settings.
5.1 Selecting Operating Modes
The EOA7530 supports three operating modes: Access Point, Client Bridge, and Client Router. Using
the procedures in the following sections, you can configure the EOA7530 to use one operating mode
for a 2.4 GHz network and another operating mode for 5 GHz networks (see section 5.1.1), or the
same operating mode for 2.4 GHz and 5 GHz networks (see section 5.1.2).
5.1.1 Selecting Separate Operating Modes for 2.4 GHz and 5 GHz Networks
To select a separate operating mode for 2.4 GHz and 5 GHz networks, use the following procedure.
1. Under the Management section, click Operation Mode. The following page appears.
22