EnGenius Technologies EOA7530 - Manual (Page 47)

packet. To ensure communication, use the maximum value. Decreasing this value
causes the sending device to discard the current packet and move on to the next.
Preamble Type Tells the receiver that data is on the way. The preamble allows the receiver to
acquire the wireless signal and synchronize itself with the transmitter. Select Long
Preamble or Short Preamble. Long Preamble can provide better wireless LAN
compatibility with legacy devices, while Short Preamble can provide better WLAN
performance.
802.11g Protection If you enable protection mode, every transmitted packet must wait until CTS is
received before it can be sent. Protection mode can prevent collision, but slows
wireless transmission speeds.
Tx Power Lets you increase or decrease transmit power. Higher transmit power may prevent
connections to the network, while the lower transmit power can prevent clients
from connecting to the device.
Distance Specify the distance between Access Points and clients. Longer distances may drop
high‐speed connections.
5.7 Wireless Access Control List
Use the Wireless Access Control List provide or deny network access to wireless clients according to
their MAC addresses.
Enable Wireless Access
Control
Place a Check to enable Wireless Access Control.
Description Enter a description for the MAC address you want to add.
MAC Address Specify the MAC address.
Add Click Add to add the MAC address.
Reset Click Reset to discard your entries.
46