EnGenius Technologies EOA7530 - Manual (Page 61)

9.4 Remote Control
Host Address Specify the IP address you want to use as your remote controller.
Port Specify the port number.
Enable Check Enable to enable remote management.
Apply/Reset Click Apply to save the changes or Reset to discard your changes.
9.5 Upgrade Firmware
Click Upgrade Firmware under the Management menu to upgrade the EOA7530 firmware. To
perform this procedure, downloaded the appropriate firmware from your vendor.
Note: The firmware upgrade procedure can take few minutes. Do not power off the EOA7530 during
the firmware upgrade, as it can cause the device to crash or become unusable. The EOA7530 restarts
automatically after the upgrade completes.
9.6 Save/Reload Settings
Click Save/Reload Setting under the Management menu to save the current settings of the device in
a file to your local disk or load settings to the device from your local disk. This feature is handy for
administrators who have several devices that need to be configured with the same settings.
60