EnGenius Technologies EOA7530 - Manual (Page 65)

10.3 WDS Bridge Mode
Step1 Log in to the web‐based configuration interface using the default IP address
192.168.1.2.
Step2 In the left pane, go to Management > Operation Mode.
Step3 Under Please choose the Operation Mode 5G, click WDS Bridge Mode.
Step4 Click Apply to save your changes.
Step5 Enter the Device A LAN IP address (for example, 192.168.10.100).
Step6 Enter the Device B LAN IP address (for example, 192.168.10.101).
Step7 In the left pane, go to Management > Status.
Step8
Under 5GHz WDS, find the 5GHz BSSID (MAC address) of the devices you want to
bridge together.
Step9 In the left pane, go to 5GHz Wireless > WDS Link.
Step10 In the Channel field, select the desired 5 GHz channel/frequency.
Step11
In the WDA MAC 0 field, enter the 5GHz BSSID (MAC address) of the WDS link
partner.
Step12 Click Apply to save your changes.
Step13 Repeat steps 2 through 12 for both WDS bridges, so that Device A has the 5GHz
BSSID (MAC address) of Device B and Device B has the 5GHz BSSID (MAC address) of
Device A.
Step14 Optional: Go to 5GHz Wireless > WDS Link and click Security to set up wireless
security for the WDS bridge mode connection. (WEP is the only encryption method
supported for the WDS bridge mode connection.)
64