EnGenius Technologies EOA7530 User Manual
Page 24
23
2. At the top of the page, click Separate Mode.
3. Under Please choose the Operation Mode. (5G), click the operating mode you want to use for the
5 GHz network.
4. Under Please choose the Operation Mode. (2.4G), click the operating mode you want to use for
the 2.4 GHz network.
Note: Client Bridge Mode and Client Router Mode cannot be used at the same time.
5. Click Apply.
5.1.2 Selecting Dual Mode for 2.4 GHz and 5 GHz Networks
The following procedure describes how to select the same operating mode for 2.4 GHz and 5 GHz
networks. If you select Client Bridge Mode or Client Router Mode, you must select the EOA7530 radio
(2.4 GHz or 5 GHz radio) that will be used with that operating mode. If you select Access Point, the
operating mode is used with both the 2.4 GHz and 5 GHz networks automatically.
1. Under the Management section, click Operation Mode.
2. At the top of the page, click Dual Mode. The following page appears.