EnGenius Technologies EOA7530 - Manual (Page 36)

Go to the Management > Status page. Under 5GHz WDS, find the Basic Service Set Identifier (BSSID)
or MAC address of the devices you want to bridge together.
BSSID (WLAN MAC
address) MAC address of the devices you want to bridge together. Record the value below:
Record BSSID here: ___________________________________________
Go to the 5GHz Wireless > WDS Link page and configure desired 5GHz wireless channel/frequency.
Channels Select the desired 5 GHz channel/frequency. All devices on the WDS network has to
has matching channels.
Data rates Accept the Auto default to have the bridged devices connect and exchange data at
an automatically agreed‐to data rate. Or you can select a specific speed, so long as
the other bridged device(s) can communicate at that speed.
WDS Bridges Enter the WDS link partner’s 5GHz BSSID (MAC address) that you recorded on above.
Apply / Cancel Click Apply to apply the changes or Cancel to discard your changes and return to the
previous settings.
35