EnGenius Technologies EOA7530 - Manual (Page 35)

In the next screen, manually enter static IP addresses for the two devices. This mode requires the
EOA7530’s DHCP server to be turned off, as noted in the table below. This is the default setting. If you
change it, please turn off DHCP Server for WDS Bridge Mode.
IP Address Specify the IP address of the EOA7530 LAN port.
IP Subnet Mask Specify the subnet mask of the EOA7530 LAN port.
Default Gateway Specify the default gateway of the EOA7530 LAN port.
802.1d Spanning Tree Enable or disable Spanning Tree. It is disabled by default
DHCP Server
DHCP Server Disable the DHCP server to prevent automatic allocation of IP addresses to LAN
client PCs. Then configure your PC’s local IP address to access the Web Configurator.
Lease Time Specify the amount of time a DHCP network user is allowed connection to the
EOA7530 with their current dynamic IP address.
Start IP Specify the starting IP address range for the pool of allocated for private IP
addresses. The starting IP address must be on the same subnet as the ending IP
address; that is the first three octets specified here must be the same as the first
three octets in End IP.
End IP Specify the ending IP address range for the pool of allocated for private IP addresses.
The ending IP address must be on the same subnet as the starting IP address; that is
the first three octets specified here must be the same as the first three octets in
Start IP.
Domain Name Specify the domain name of the EOA7530’s private LAN settings.
Apply / Cancel Click Apply to apply the changes or Cancel to discard your changes and return to the
previous settings.
34