EnGenius Technologies EOA7530 - Manual (Page 55)

Login Specify the user name supplied by your ISP.
Password Specify the password supplied by your ISP.
Service IP Address Specify the service IP address supplied by your ISP.
Connection ID Specify the connection ID supplied by your ISP.
MTU Specify the Maximum Transmit Unit size. It is recommended you accept the default
setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set
too high or too low, which impacts network performance. In extreme cases, an MTU
setting that is too low can prevent the EOA7530 from establishing some connections.
Type Select a connection type from the drop‐down menu. Choices are:
• Keep Connection = device connects to the Internet automatically.
• Automatic Connection = device connects to the Internet automatically when the
traffic goes through the Internet and disconnects after a period of idle time
elapses.
• Manual Connection = device connects to the Internet manually.
Idle Timeout If the EOA7530 is configured for Automatic Connection, specify the maximum
amount of time the device can remain idle before disconnecting.
Enable PPTP pass through
on VPN Connection
Check PPTP pass through on VPN Connection. Otherwise, the EOA7530 will not be
able to connect to the Internet via PPTP.
Enable IPSec pass through
on VPN Connection
Check IPSec pass through on VPN Connection. Otherwise, the EOA7530 will not be
able to transmit data using the IPSec protocol.
Enable L2TP pass through
on VPN Connection
Check L2TP pass through on VPN Connection. Otherwise, the EOA7530 will not be
able to connect to the Internet using L2TP.
Apply / Cancel Click Apply to apply the changes or Cancel to discard your changes and return to the
previous settings.
54