Epson 5000 User Manual

Page 80

While holding down the

ALT

button, press

the LOAD/EJECT

button to feed the paper forward or the

LF/FF

button to

feed the paper backward, as indicated by the arrows above
the buttons.

Adjusting the loading position

The loading position is the position of the paper after it has
been automatically loaded by the printer. If printing is too high

or low on the page, change the loading position with the
micro-feed feature as follows:

Make sure the printer is turned on. If necessary, lift the

printer cover up so you can see the paper position.

2. Load either continuous or single-sheet paper. (Load

continuous paper by pressing the

LOAD/EJECT

button.)

The

MULTI-PART light

begins to flash.

Note:

You can adjust the loading position only while the MULTI- PART light

is flashing.

Using the Printer

3-15