Epson 5000 - Manual (Page 75)

Page length
Page length 2-1 2-2
8.5 inches (216 mm) Off On
11 inches (279 mm) Off Off
11.7 inches (296 mm) On On
12 inches (305 mm) On Off
DIP-switch functions
This section describes the functions of the DIP switches.
International character sets
You can choose from eight international character sets by
setting DIP switches 1-1, 1-2, 1-3, and 1-4 according to the
“International character sets” table on page 3-19. See the
Appendix for character samples.
The character sets you can select by DIP switch are USA,
France, Germany, United Kingdom, Denmark I, Sweden, Italy,
and Spain I. However, you can select the following sets only
with the ESC R software command: Japan (English), Norway,
Denmark II, Spain II, Latin America, Korea, and Legal.
Note:
If you send the ESC t 0 command (to select italics) while DIP switch
1-4 is on, the international character set is always USA.
Character tables
Your printer has either 13 (for the European version) or 8 (for
other versions) built-in character tables: 1 italics table and 12
(for the European version) or 7 (for other versions) graphics
character tables.
3-10 Using the Printer