Connecting the printer to your computer, Connecting the printer to your computer -13 – Epson 5000 User Manual

Page 36

5. To stop the self test, press the PAUSE button (you can resume

the self test by pressing the PAUSE button again).

6. Press the LOAD/EJECT button to eject the paper from the

printer and then turn the printer off.

If test results are not satisfactory, see Chapter 6.

Here is part of a typical self test in LQ mode.

Connecting the Printer to Your Computer

If the self test prints correctly, you are ready to connect your

printer to the computer. Use a shielded twisted-pair parallel
cable to connect your computer to the printer’s built-in parallel

interface.

Setting Up the Printer

1-13