Enterasys Networks Enterasys Diamond Distributed Forwarding Engine 7KR4297-04 - Manual (Page 51)

Matrix DFE-Platinum Series Module Installation Guide A-1
A
Specifications
This appendix provides information about the following:
Enterasys Networks reserves the right to change the specifications at any time without notice.
DFE-Diamond Module Specifications
Table A‐1 provides the I/O ports, processors and memory, physical, and environmental module
specifications for the DFE modules.
For information about... Refer to page...
DFE-Diamond Module Specifications A-1
10-Gigabit Ethernet Transceiver Specifications (XFP) A-2
COM Port Pinout Assignments A-3
Regulatory Compliance A-4
Table A-1 Specifications
Item Specification
7KR4297-02 Ports
Ports 1 and 2 Port interface option slots that support 10GBASE XFP PHYs. Each
port can support a full 10 Gbps throughput with a maximum of 20
Gbps, when both ports are active at the same time.
7K4297-04 Ports
Ports 1 through 4 Port interface option slots that support 10GBASE XFP PHYs. Each
port can support a full 10 Gbps throughput with a maximum of 40
Gbps, when all ports are active at the same time.
Processors/Memory
Processor MPC750CX, 400 MHz processor
Dynamic Random Access Memory
(DRAM) 256 MB
FLASH Memory 32 MB