Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder - Manual (Page 17)

17

ASI Outputs: this tab is used to configure/monitor the ASI ports.

IP Outputs: this tab is used to configure/monitor the IP Output ports. The configuration
panel provides the facilities to create, manage and delete ports; the statistics panel
includes transmission status information.

Video Inputs : this tab provides status information on the video inputs. In the
configuration area, it can be used configure some input port parameters.

Encoder Mode: this tab is used to configure some common parameters for all encoding
sessions.

Encoder 1-4: these tabs are used to configure the individual settings for each encoder
session. Only one tab will be shown if the encoder is in single-channel mode.

Encoder X Audio Y/Z: these tabs are used to configure up to two audio services for a
given encoder. The number of such tabs presented is a function of the number of
configured audio services.

Connections: this tab is used to configure/monitor connections. The configuration panel
provides facilities to create, edit and delete connections; the statistics panel provides a
table where the status of all the connections in the unit can be inspected at a glance.

Admin: this tab is used for general administrative functions, such as firmware upgrades,
licensing, logs, and configuration management. The Test Packet Generator configuration
is also found under this tab.

Support: this tab provides customer support information. It appears only on the
Configuration panel.