Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder User Manual
Page 109
109
The configuration interface is divided into two areas:
TPG Configuration Parameters
, described in this section.
Output Selection Connection Parameters,
described in the Destination Selection
section of the Connections Tab chapter.
The TPG Configuration Parameters are:
Port Name:
All 9992-ENCports have a user-defined name, to facilitate routing. Enter
any suitable name.
Mode:
controls the type of MPEG-2 transport packets generated. The options are:
o
Disabled:
TPG is disabled. No packets are being generated.
o
NULL Packets:
TPG is generating NULL packets. If you select this option, the
PID
parameter becomes read-only with the value 1FFF.
o
Ramp48 Packets:
TPG is generating packets with a “Ramp48 Payload”. A
“Ramp48 Payload” is composed of the bytes 0x48, 0x49, 0x4A, …, 0xFF.
TPG
Configuration
Parameters
Output Selection
Connection
Parameters