Cobalt Co9992-4ENC-4K-HEVC Software-Defined Broadcast Encoder - Manual (Page 22)

22
Once the setting is applied, a green success or a red error message will appear just below the
Cancel button, as follows:
Network Configuration DNS Tab
The DNS tab allows manual configuration of up to two DNS servers. Additional DNS servers
may be acquired via DHCP, if that method is configured. The DNS servers do not need to be in
the same subnetwork as the streaming ports, as long as at least one default gateway is configured.
DNS is used in conjunction with the RTMP or HLS output functionality. If you are not using
these functions, there is no need to configure DNS servers.
The following applies to these configuration items:

Values entered take effect immediately.

An unused entry should be set to 0.0.0.0.

DNS servers will be contacted in the order defined by the DNS Priority list. Note that
the list automatically re-sorts as changes are made.