Jocfs1: safe boot jumper – MSI MPG Z790 CARBON WIFI LGA 1700 ATX Motherboard User Manual

Page 50

⚠

CAUTION

Do not connect the wrong type of LED strips. The JRGB connector and the JARGB_V2

connector provide different voltages, and connecting the ARGB 5V LED strip to the

JRGB connector will result in damage to the LED strip.

⚠

Important

∙

If you connect the ARGB Gen1 and ARGB Gen2 LED strips into the same connector, it

may cause some issues. Please do not mix the ARGB Gen1 LED and the ARGB Gen2

LED strips together.

∙

It is recommended that you install LED strips with the same specification to achieve

the best effects.

∙

Always turn off the power supply and unplug the power cord from the power outlet

before installing or removing the addressable RGB LED strip.

∙

Please use MSI’s software to control the extended LED strip.

Normal

(default)

Boot with the saved

BIOS settings.

Enabled

Apply the BIOS default

settings and lower PCIe

(from CPU) mode for

Safe Boot

JOCFS1: Safe Boot Jumper

This jumper is used for Safe Boot. Once enabled, the system will boot with default

settings and lower PCIe (from CPU) mode.