Canon WFT-R10A Wireless File Transmitter for EOS R5 C & R5 Mirrorless Camera - Manual (Page 85)

Auto Retry if Transfer Fails
If transfer fails, the transmitter's 〈 〉 lamp blinks in red. In this case, the following
screen is displayed after you press the 〈 〉 button and select [ : WFT settings ].
To resolve the error displayed, see Troubleshooting .
Once the cause of the error is eliminated, the images whose transfer previously failed will be
re-transferred automatically. With this option activated, transfer is attempted again
automatically after failure, whether automatic transfer is used or captured images are
transferred via FTP. Note that when you cancel image transfer or turn off the transmitter or
camera, the image will not be re-transferred automatically.
See
Batch Transfer and transfer the images.
Note
If you prefer not to disconnect from the LAN, set [ Power saving ] on the [ FTP
transfer settings ] screen ( ) to [ Disable ].
85