Canon WFT-R10A Wireless File Transmitter for EOS R5 C & R5 Mirrorless Camera - Manual (Page 49)

Connecting with a Manual Connection
The network settings for the camera access point mode are configured manually. Set
[
SSID ], [ Channel setting ], [ Encryption settings ], and [ IP address setting (IPv4) ] on each
screen displayed.
1.
Select [Manual connection].
Select [ OK ] to proceed to the next screen.
2.
Enter the SSID (network name).
Press 〈 〉 to display the virtual keyboard ( ), then enter the SSID.
After entering the SSID, press the 〈 〉 button.
Select [ OK ] to proceed to the next screen.
3.
Select the desired channel setting.
To specify the settings manually, select [ Manual setting ], then select
the setting by using 〈 〉 .
Select [ OK ] to establish a connection with the access point.
49