Canon WFT-R10A Wireless File Transmitter for EOS R5 C & R5 Mirrorless Camera - Manual (Page 33)

Connecting via WPS (PBC Mode)
These instructions are continued from Checking the Type of Access Point .
This is a connection mode available when using an access point compatible with WPS. In
pushbutton connection mode (PBC mode), the camera and the access point can be
connected simply by pressing the WPS button on the access point.
If multiple access points are active in the surrounding area, it may be more difficult to
establish a connection. In such a case, try using [
WPS (PIN mode) ] to establish a
connection.
Check the position of the WPS button on the access point in advance.
It may take approx. one minute to establish a connection.
1.
Select [Connect with WPS].
2.
Select [WPS (PBC mode)].
Select [ OK ] to proceed to the next screen.
33