Epson 2500 - Manual (Page 128)

122 Maintenance
If you need to replace an ink cartridge before you see a message
(because the ink is too old, for example) follow the instructions
in “Replacing an Outdated Ink Cartridge” on page 125.
Removing and Installing Ink Cartridges
You can replace a cartridge whenever you see a message that the
cartridge is low on ink or empty. (If you press the
R cleaning
button before you see a message, the EPSON Stylus Scan cleans
the print head, as described on page 126.) Follow these steps:
1. Make sure the EPSON Stylus Scan is turned on and not
printing. Open the document cover, and then open the
maintenance cover. The internal cover opens automatically.
2. Press the
R cleaning button and hold it for about three
seconds until the print head moves left and the Operate
light begins flashing.
note:
If you’ve installed the
automatic document
feeder, remove it from
the EPSON Stylus
Scan, but don’t
disconnect it from the
option interface.
Maintenance
cover
Document cover
Internal cover
Cleaning
button