Panasonic TH-86CQE1W 86" Class 4K UHD Commercial Monitor - Manual (Page 38)

English - 37 -
sends the magic packet and the device which receives
the magic packet to wake-up. You can use any Wake-
on-LAN software available for the operating system of
your device in order to send magic packets.
How to control functionality
• Enable Networked Standby Mode option from
Settings>Network menu by settings as On
• Connect your Display and the remote device, which
will send the magic packets to the Display, to the
same network
• Get the MAC address of your Display which will be
needed in order to send magic packets
• Switch the Display into standby mode
• Send magic packets to the MAC address of your
Display by using mobile phones, Linux or Windows
computers
Your Display should wake up after receiving magic
packets.
Wireless Display
Wireless Display is a standard for streaming video and
sound content. This feature provides the ability to use
your Display as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and Display.
(For 98/86inch model)
Plug in the WLAN USB dongle to Display first.
(For other inch model)
WLAN USB dongle is built into the display.
Plug in the WLAN USB dongle to Display first, then
press the Wireless Display button on the remote and
switch to Wireless Display source.
A screen appears stating that the Display is ready
for connection.
Open the sharing application on your mobile device.
These applications are named differently for each
brand, refer to the instruction manual of your mobile
device for detailed information.
Scan for devices. After you select your Display and
connect, the screen of your device will be displayed
on your Display.
Note: This feature can be used only if the mobile device
supports this feature. If you experience problems with the
connection check if the operating system version you use
supports this feature. There may be incompatibility problems
with the operating system versions which are released after
the production of this Display. Scanning and connecting
processes differ according to the programme you use. The
maximum supported resolution is 1920x1080. Image quality
may be affected by neighbouring wireless networks and your
internet connection speed.
The network connection settings may be initialized when
you finish this feature. In that case, please check Network >
Advanced Settings.
Connectivity
Troubleshooting
Wireless Network Not Available
• Ensure that any firewalls of your network allow the
Display wireless connection.
• Try searching for wireless networks again, using the
Network menu screen.
If the wireless network does not function properly,
try using the wired network. Refer to the Wired
Connectivity section for more information on the
process.
If the Display does not function using the wired
connection, check the modem (router). If the
router does not have a problem, check the internet
connection of your modem.
Connection is Slow
See the instruction book of your wireless modem to
get information on the internal service area, connection
speed, signal quality and other settings. You need to
have a high speed connection for your modem.
Distruption during playback or slow
reactions
You could try the following in such a case:
Keep at least three meters distance from microwave
ovens, mobile telephones, bluetooth devices or any
other WLAN compatible devices. Try changing the active
channel on the WLAN router.
Internet Connection Not Available
If the MAC address (a unique identifier number) of
your PC or modem has been permanently registered,
it is possible that your Display might not connect to
the internet. In such a case, the MAC address is
authenticated each time when you connect to the
internet. This is a precaution against unauthorized
access. Since your Display has its own MAC address,
your internet service provider cannot validate the MAC
address of your Display. For this reason, your Display
cannot connect to the internet. Contact your internet
service provider and request information on how to
connect a different device, such as your Display, to
the internet.
It is also possible that the connection may not be
available due to a firewall problem. If you think
this causes your problem, contact your internet
service provider. A firewall might be the reason of a
connectivity problem.