Panasonic TH-86CQE1W 86" Class 4K UHD Commercial Monitor - Manual (Page 16)

English - 15 -
98-inch model
1. Confirm that the power cord holder is raised so that the power cord can be inserted. (Fig. 1)
2. Then insert the connector completely in the correct direction. (Fig. 2)
3. Lower the power cord holder. (Fig. 3)
4. Press down the power cord holder until the end of the power cord holder snaps onto the power cord to
secure the power cord. (Fig. 4)
Note : When pressing down and snapping the AC cord holder onto the AC cord, hold the AC cord from the
opposite side to avoid excessive force to be applied on the terminal. (Fig.5)
Fig.1 Fig.2 Fig.3
Fig.4 Fig.5
How to unplug the AC cord
1. Raise the power cord holder fixing the AC cord upward. (Fig. 1)
2. While holding the Power cord holder, pull out the AC cord from the terminal of the display.(Fig.2)
Fig.1 Fig.2