Panasonic TH-86CQE1W 86" Class 4K UHD Commercial Monitor User Manual
Page 32
English
- 31 -
SLOT Settings
Press
ENTER
to open the
SLOT Settings
menu screen. Three sub-menu options are
available.
SLOT Status:
Displays whether the
SLOT module is on or off. Allows the change of
status via soft PSON signal (0.5s)
Boot Signal:
Enables or disables sending of a PSON signal. The Display checks the
status signal of the
SLOT at bootup in order to turn it on by sending a PSON signal if
it is off. Some SLOT's
send incorrect information on their status during the bootup of
the Display, so they seem to be on even though they are off. For such non-standard
SLOT's, this option must be enabled. In this case, a PSON signal will be send for the
SLOT
regardless of the received status information at bootup.
Powerdown:
Turns the
SLOT off via hard PSON signal (5s)
Recovery Mode:
When this option is enabled and
SLOT
is on, if there is no video
for 10 seconds it resets hotplug. If there is no video available after 30 seconds it
reboots
SLOT
.
SLOT Always on:
When this option is enabled,
Power Mode
will be forced to reactive
and greyed out in the menu and
SLOT
will not be set to standby.
Note:
This menu will not be available if SLOT is not supported or not connected to the unit.