Panasonic TH-86CQE1W 86" Class 4K UHD Commercial Monitor User Manual
Page 31
English
- 30 -
USB
Clone to USB
Copies the database files from the unit to a connected USB device.
Clone from USB
Copies the database files from a connected USB device to the unit.
Copy app cache
from USB
Copies app cache data from a connected USB device to the unit.
Note:
This feature may not be available depending on the model of your unit.
USB Information
Press
ENTER
to open the
USB information
menu screen. Current
Total space
and
Free space
information of the connected USB device will be displayed. You can also
format the connected USB device using the
Format Disk
option in this menu (FAT32
format only).
USB Operations
Highlight and press
ENTER
to perform USB operations.
The feature that uses this item is as follow.
- Settings>Signage>Controls>No Signal
USB Option
Set as
Off
to disable the USB ports on the Display. You can also set this option as
5V
to provide 5 volts power over USB. In this case it will still not be available to browse the
USB content via Media Browser feature of the Display.
Safely Remove
You can use this option to remove the devices connected to the USB inputs of the
Display safely. Highlight this option and press
ENTER
. Wait for the message to be
displayed on the screen indicating that you can remove your device and then remove
your device. Failure to do so, may cause problems when you connect your USB
device to other devices and you might have to format your USB device.
Video Wall Settings
Press
ENTER
to open the
Video Wall Settings
menu screen.
Video Wall Settings
,
Row Count, Column Count, Cell
and
Offset
options are available.
Video Wall Settings:
Enable or disable the Video Wall function by pressing
Left/
Right
directional buttons.
Row count:
Adjust the number of Video Wall “rows” by pressing
Left/Right
directional
buttons. The maximum number that can be set is 10.
Column count:
Adjust the number of VideoWall “columns” by pressing
Left/Right
directional buttons. The maximum number that can be set is 10.
Cell:
Each Video Wall unit is called “Cell”. Adjust the number of a cell by pressing
Left/Right
directional buttons. The maximum number that can be set is 100. In order
to disable video wall function of the unit and display the image in full-screen mode,
the
Cell
option should be set as
0
.
Offset:
Offset setting is used to adjust the refractions at the sides of the picture
depending on the bezel thickness between Video Wall units (Cells). The maximum
number that can be set is 50.
For example;
For a 2x3 video wall matrix,
Row count
option should be set as
2
and
Column count
option should be set as
3
. Numbers of the cells in a video wall matrix will
be determined as shown in the template below. If you are setting the Display, which is
positioned same as the Display with the number
1
in this template, then the
Cell
option
should be set as
1
for this Display.