NEC M861 86" UHD 4K HDR Commercial Monitor - Manual (Page 7)

English−3
WARNING
4
PROHIBITED
REQUIRED
Handle the power cord with care. Damaging the cord could lead to fire or electric shock.
• Do not place heavy objects on the cord.
• Do not place the cord under the product.
• Do not cover the cord with a rug, etc.
• Do not scratch or modify the cord.
• Do not bend, twist or pull the cord with excessive force.
• Do not apply heat to the cord.
If the cord gets damaged (exposed core wires, broken wires, etc.), turn off the product’s
power, then unplug the power cord from the power outlet. Ask your dealer to replace it.
5
PROHIBITED
Do not touch the power plug if you hear thunder. Doing so could result in electric shock.
6
REQUIRED
Please use the power cord provided with this product in accordance with the power cord
table.
If a power cord is not supplied with this product, please contact us. For all other cases,
please use the power cord with the plug style that matches the power socket where the
product is located. The compatible power cord corresponds to the AC voltage of the power
outlet and has been approved by, and complies with, the safety standards in the country of
purchase.
7
REQUIRED
For proper installation it is strongly recommended to use a trained service person.
Failure to follow the standard installation procedures could result in damage to the product
or injury to the user or installer.
8
REQUIRED
PROHIBITED
Please install the product in accordance with the following information.
This product cannot be used or installed without the table top stand or other mounting
accessory for support.
When transporting, moving, or installing the product, please use as many people as
necessary to be able to lift the product without causing personal injury or damage to the
product.
• We recommend four or more people.
• Four handles are required when transporting.
Please refer to the instructions included with the optional mounting equipment for detailed
information about attaching or removing.
Do not cover the vent on the product. Improper installation of the product may result in
damage to the product, an electric shock or fire.
Do not install the product in the locations below:
• Poorly ventilated spaces.
• Near a radiator, other heat sources, or in direct sunshine.
• Continual vibration areas.
• Humid, dusty, steamy, or oily areas.
• Outdoors.
• High-temperature environment where humidity changes rapidly and condensation is
likely to occur.
• A ceiling or wall that is not strong enough to support the product and mounting
accessories.
Do not mount the product upside down.