NEC M861 86" UHD 4K HDR Commercial Monitor - Manual (Page 66)

English−62
Chapter 7
External Control
This Chapter Includes:
> “Controlling the Monitor via RS-232C” on page 63
> “Controlling the Monitor via LAN” on page 64
> “Commands” on page 73
> “Proof of Play” on page 74
Connecting an external device
There are two options to connect an external device to control the monitor.
• RS-232C terminal.
Connecting an external device to the RS-232C terminal of the monitor with an RS-232C cable.
• LAN port.
Connecting a network to the LAN port of the monitor with a LAN cable (RJ-45 category 5 or higher).