NEC M861 86" UHD 4K HDR Commercial Monitor - Manual (Page 41)

English−37
Operating Range for the Remote Control
Point the top of the remote control toward the monitor’s remote control sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.) from the remote
control sensor, or at a horizontal and vertical angle of within 30° and within a
distance of about 3.5 m (10 ft.).
NOTEN:
The remote control system may not function when direct sunlight or strong
illumination strikes the remote control sensor, or when there is an object in
the path.
Handling the remote control
• Do not expose to strong shock.
• Do not allow water or other liquid to splash on the remote control.
If the remote control gets wet, wipe it dry immediately.
• Avoid exposure to heat and steam.
• Except to install the batteries, do not open the remote control.
Using Power Management
This function decreases the power consumption of the monitor when it is not in use.
When connected to a computer, power consumption by the monitor reduces automatically if the keyboard or mouse are not
used during the time set in the computer’s power management settings. Refer to your computer’s user manual for more
information.
When connected to an AV source, such as a Blu-ray, DVD, or streaming video player, power consumption by the monitor
reduces automatically after a certain amount of time has passed since the monitor recognized “no signal input”. This option is
turned on or off in the [POWER SAVE] settings in [POWER SAVE SETTINGS] menu of the OSD. See page 102 .
NOTEN: • Depending on the computer and display card used, this function may not operate.
• After the video signal is lost, the monitor automatically turns off after a preset time period. Please refer to the [TIME
SETTING] in [POWER SAVE SETTINGS] page 102 .
• Schedules can be created for the monitor to power on or standby at specific times. See page 44 .
• Please refer to the [POWER SAVE] in [POWER SAVE SETTINGS] for the power management function.