NEC M861 86" UHD 4K HDR Commercial Monitor - Manual (Page 42)

English−38
Showing the Information OSD
The Information OSD provides information such as: Input Source, etc.
Press the DISPLAY button on the remote control to bring up the Information OSD.
H
3840 x 2160@60Hz
HDMI1 MONITOR ID:1
IP ADDRESS: 192.168.0.10
1 Input name
2 Resolution Information
3 HDR Information
4 Communication Info*
* Shows when [COMMUNICATION INFO.] is [ON].
Green: Connected LAN
Red: Not connected LAN
Switching Between Picture Modes
Press the PICTURE MODE button on the wireless remote control to cycle through the picture modes [NATIVE], [RETAIL],
[CONFERENCING], [HIGHBRIGHT], [TRANSPORTATION] and [CUSTOM].
The picture modes are pre-configured with settings for general use. See
“Using Other Picture Modes” on page 51 for
instructions on changing the picture mode settings.