Protect, Ve settings] menu of the osd. see – NEC M861 86" UHD 4K HDR Commercial Monitor User Manual
Page 106
English−102
PROTECT
PROTECT MENU
POWER SAVE SETTINGS
POWER SAVE
Enables or disables the monitor entering power saving mode. When [ENABLE] is selected, the monitor
goes into power saving mode after the period of time has passed with no input signal detected or signal
loss has occurred. When the monitor is in power saving mode, the LED power indicator will change color.
Refer to the Power indicator table (see
). When [DISABLE] is selected, the monitor doesn’t go
into power saving mode.
Please refer to the monitor’s specifications (see
) for
power consumption information.
NOTE:
• When the monitor is connected to a computer, the computer’s display adapter may not stop
sending digital data even though there is no image on-screen. If this occurs the monitor will
not switch into standby mode.
• If [AUTO OFF] or [CUSTOM] is selected in [HUMAN SENSING]*
1
, the power save function
does not work.
*
1
: This function is available only when connecting the optional sensor unit.
TIME SETTING
Sets the amount of time the monitor should wait for input signal before going into power save mode.
POWER SAVE MESSAGE
Shows a message as the monitor is entering low power mode.
QUICK START
When [ENABLE] is selected, the monitor will quickly return to the [ON] state when a signal is detected.
Enabling this option increases standby power consumption.
THERMAL MANAGEMENT
FAN CONTROL
When [AUTO] is selected, the fans will only turn on when the internal temperature reaches the
temperature set at any one of the sensors in this menu. The fans will automatically turn off when the
monitor is cooler. When [ON] is selected the fans are always on. The fans cannot be turned off manually.
Use the
or
button on the remote control to adjust the maximum internal temperature the monitor can
reach before the fan turns on when [AUTO] is selected.
FAN SPEED
The [FAN SPEED] can be adjusted between LOW and HIGH.
DISPLAY
FAN STATUS
Shows the status of the monitor’s internal fan.
INTERNAL
TEMPERATURE
Shows the status of the internal temperature of the monitor.
SLOT
Shows the internal temperature of the Option Board.
FAN STATUS
Shows the status of the fan for the Option Board.
INTERNAL
TEMPERATURE
Shows the status of the internal temperature of the Option Board.
SYSTEM FAN
REQUIREMENT
Show the requirement operation from the Option Board.
OPTION
COMPUTE MODULE