Epson SureColor P5000 Commercial Edition 17" Wide-Format Inkjet Printer - Manual (Page 170)

170
LCD screen message Condition/solution
SpectroProofer Error
See documentation for
how to solve the
problem.
(error code)
See the SpectroProofer documentation for details on the displayed error
code.
SpectroProofer Error
Connect cable of
SpectroProofer then
restart printer.
Turn off the printer and make sure the SpectroProofer mounter is connected
correctly. Wait a moment, then turn on the printer again.
See the SpectroProofer mounter documentation for details.
SpectroProofer Error
Refer to the manual and
connect the ILS to
SpectroProofer. Turn
the printer power off,
and then on again.
Turn off the printer and remove the color measurement device from the
SpectroProofer. Reinstall it correctly, then turn on the printer again.
See the SpectroProofer UVS documentation for details.
F/W Install Error
Firmware update failed.
Restart the printer.
The firmware updated did not install.
Turn off the printer, wait for awhile, and turn on the printer again. Run the
firmware update again.
If the message still appears, contact Epson for support.
Maintenance Request
Replace Part
Soon/Replace Part Now
(maintenance request
code)
A part used in the printer is nearing the end of its service life. Contact Epson
for support and provide them with the displayed maintenance request code.
The error persists until you replace the requested part.