Replacing the cutter – Epson SureColor P5000 Commercial Edition 17" Wide-Format Inkjet Printer User Manual
Page 156

156
Note:
Do not touch the adhesive on the sheet (the dark gray area).
7.
With the adhesive facing toward you, insert the cleaning sheet on the left side of the printer until it
reaches the end of the roll paper feed slot, then pull it out. Repeat this two to three times. Repeat for
the center and right side of the roll paper feed slot.
Note:
You can use a cleaning sheet only once.
8.
Press the
load paper button when complete.
Parent topic:
Related references
Optional Equipment and Replacement Parts
Replacing the Cutter
If you notice that your paper does not cut cleanly, you may need to replace the cutter.
Note:
If the optional SpectroProofer is installed, remove it before replacing the cutter. See the
instructions that came with the SpectroProofer for details on removing it from your printer.
1.
Remove any paper from the printer.
- Stylus Pro 7800 (11 pages)
- Stylus Pro 4000 (49 pages)
- Stylus Photo R300 (2 pages)
- Stylus Pro 7000 (147 pages)
- AcuLaser C3000 (316 pages)
- Stylus Pro 7900 (24 pages)
- Stylus Pro 4450 (21 pages)
- 1000 (272 pages)
- T034120 (4 pages)
- T580300 (4 pages)
- 300 (91 pages)
- B 510DN (190 pages)
- B 510DN (218 pages)
- Stylus NX510 (8 pages)
- Stylus Photo RX580 (95 pages)
- T549300 (4 pages)
- B 500DN (168 pages)
- AculaserCX11NF (5 pages)
- 480SXU (24 pages)
- 4500 (317 pages)
- STYLUS RX500 (99 pages)
- 2100 (13 pages)
- Stylus NX215 (2 pages)
- T098320 (4 pages)
- T041020 (4 pages)
- R210 (8 pages)
- All-In-One Stylus Photo RX600 (164 pages)
- 777I (53 pages)
- T033120 (4 pages)
- Stylus CX7000F (8 pages)
- 60 (113 pages)
- T034220 (4 pages)
- WorkForce 40 Series (36 pages)
- T054220 (4 pages)
- Stylus CX3200 (11 pages)
- Stylus CX7800 (18 pages)
- T060220 (4 pages)
- 2500 (180 pages)
- AcuLaser CX11N (32 pages)
- AcuLaser CX11N (4 pages)
- 2000P (16 pages)
- T606600 (4 pages)
- Stylus CX6000 (18 pages)
- FS-4000DN (2 pages)
- MSDS T544700 (4 pages)